BLUE BIRD SG13H STUMP GRINDER

This Blue Bird Stump Grinder comes equipped with a Honda GX390 engine, built on a welded 7-gauge steel frame.

The SG13H stump grinder now features Greenteeth 900 Series cutting system (not pictured) that provides more aggressive and efficient cutting results due to its lightweight and unique tooth design that can be rotated 360 degrees to get max life out of the teeth. This powerful machine will allow you to easily grind objects up to 12” below the ground.

The Honda GX390 engine is certainly one of the best engines in the business. The GX390 is more powerful, quieter, uses less fuel and has lower emissions. This Honda engine has exceptional performance with its digital ignition system, increased compression ratio a sophisticated air intake system – the GX390 lives up to its legendary reputation.

Features:

• Cutter Wheel – Vertical 14″ X 3/8 wide.
• Wheels – 12″ pneumatic knobby tread.
• Frame Construction – Welded Steel.
• Drive System – Noram centrifugal clutch, double v-belt.
• Power – Honda GX390 13hp engine.
• Weight – 252lbs.
• Handle – Adjust to four height positions for operator comfort.

Specifications – Self-Propelled Model

Engine
20-HP Kohler or Honda with Electric Start
25-HP Kohler or Honda with Electric Start
Low oil pressure shutdown
Heavy duty industrial cartridge-type air filter

Cutter Wheel
14″ diameter x 3/8″ thick
1,575 RPM when engine is at 2,500 RPM
1-1/2″ diameter cutter wheel shaft
1-3/16″ self-aligning pillow block bearings
8 reversible pockets
8 individual carbide teeth with 1/2″ square shank

Cutting Range
Any diameter, no limitations
24″ above ground; 16″ below ground

Drive Train
Hydrostatic drive and transaxle with disc brake
Fully-enclosed 14 ga. steel belt guard secured to frame (not engine)
2V Grooved HI POWER belts, A section banded
Infinitely variable speed control
Positive mechanical drive belt adjustment
Positive locking free-wheel position

Options:
Green wheel for sharpening teeth

General
Width: 32″
Height to top of engine: 42″
Weight: 550 pounds (varies w/engine selection)
Frame: 7 gauge hot-rolled steel channel; all welds continuous
Handle Bar: heavy-duty 1-5/16″ steel pipe; 7 position handle bar yields size range from 101″ length and 39″ height (lowest position) to 78″ length and 61″ height (highest position)
Tires: 6.50 x 16″ Super Lug Traction Mudder mounted on removeable wheel with 4-bolt hub
Brakes: disc brakes, hand engaged with easy-to-reach lever on handle bar. Return spring ensures non-stick release
Gas Tank: 3-gallon marine style UL approved
Battery: Heavy duty 340 CCA battery in completely enclosed steel battery box
PTO: Electric PTO
Throttle: Positive locking veneer type throttle cable

Manual
Manual is located in a weatherproof Manual Pack mounted on the handle bar and attached with a steel tether. This ensures that the manual stays with the unit and the operator can review the operational instructions at any time. A second manual is included with each unit and is also available on CD-ROM.
Specifications subject to change without notice or obligation.